Forums
Lawson Add-Ins for Microsoft Office
HR02 Add-in to change to Inactive
Author
Messages
YvonneG
New Member
Posts: 3
3/21/2013 7:23 PM
We are changing our HR Process Level and Department structure so I need to inactivate hundreds of HR02 departments. I've tried creating an add-in to do this but I don't get any results. No changes are made and no errors display in my spreadsheet.
There must be some hidden field or code I need to pass to make the current record in my spreadsheet the current record in the form, but I don't know what field/s or codes to use.
Any advice would be appreciated. Thanks
Dave Curtis
Veteran Member
Posts: 136
3/21/2013 8:06 PM
f2_DPT-COMPANY
f5_PT-DPT-PROCESS-LEVEL
f6_PT-DPT-DEPARTMENT
f7:0_LINE-FC1
f8:0_DPT-PROCESS-LEVEL1
f9:0_DPT-DEPARTMENT1
f11:0_DPT-ACTIVE-FLAG1
(H)_f4_PT-XMIT-ST-CHG
f2, f5 and f6 are the ones that should bring your current line to the "top" on the form f7 - f11 are the fields you would fill in
f4, if I am remembering correctly, you will want to have a 1 in that field because you will get a standard message from Lawson that deactivating a department will take time "Hit OK to continue" and by using the XMIT field you can push past that.
It has been awhile since I did inactivations with an upload but if my memory is correct, this setup should get you what you need.
Greg Moeller
Veteran Member
Posts: 1498
3/21/2013 8:10 PM
Dave is correct: See KB 1194666
YvonneG
New Member
Posts: 3
3/21/2013 9:03 PM
Perfect!!
The _f4 PT-XMIT-ST-CHG set to 1 did the trick. Thank you so much.