PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 11/10/2017 9:20 AM by  Bob Canham
How do I update information on "page 3" of HR15.1
 6 Replies
Sort:
You are not authorized to post a reply.
Author Messages
Todd Mitchell
Senior IT Specialist
Gordon Food Service
Veteran Member
(179 points)
Veteran Member
Posts:77


Send Message:

--
11/10/2017 7:46 AM

    How do update an item on "page 3", page down twice, of HR15.1. 

    David Williams
    Private
    Private
    Veteran Member
    (3064 points)
    Veteran Member
    Posts:1032


    Send Message:

    --
    11/10/2017 8:16 AM
    You can do it from HR11 - you have to pass the FCr0, HRU-FIELD-TYPEr0, HRU-FIELD-KEYr0 and VALUEr0 values in.
    0=zero
    David Williams
    Todd Mitchell
    Senior IT Specialist
    Gordon Food Service
    Veteran Member
    (179 points)
    Veteran Member
    Posts:77


    Send Message:

    --
    11/10/2017 8:59 AM
    Unfortunately, that won't work for my situation. I am working on a New Hire flow, therefore the employee hasn't been created yet, the potential employee is still in applicant status.
    Bob Canham
    Private
    Private
    Veteran Member
    (561 points)
    Veteran Member
    Posts:203


    Send Message:

    --
    11/10/2017 9:07 AM
    Are you adding the new hire via HR11 in your flow? Or are you using a PA52.4 action? If you're using PA52.4, you should add the user field you want updated as one of the action fields. If you don't have enough fields available, you can do a 2-part action. If you're doing via HR11, then you would do the add on HR11 for the new hire, and then a change on HR11 for the user field.
    David Williams
    Private
    Private
    Veteran Member
    (3064 points)
    Veteran Member
    Posts:1032


    Send Message:

    --
    11/10/2017 9:07 AM
    If you open the form in Design Studio, you will see the syntax for field names required for Company, Employee/Applicant, etc. and you can add those values to your AGS call with the others I mentioned.
    David Williams
    Todd Mitchell
    Senior IT Specialist
    Gordon Food Service
    Veteran Member
    (179 points)
    Veteran Member
    Posts:77


    Send Message:

    --
    11/10/2017 9:14 AM

    The flow uses PA31 to create the Applicant, then HR15.1 for a few user fields, then we do the PA52.4 HIRE1 action.

    Bob Canham
    Private
    Private
    Veteran Member
    (561 points)
    Veteran Member
    Posts:203


    Send Message:

    --
    11/10/2017 9:20 AM
    I did some poking on PA31, and it doesn't look like it has the pass through to HR15 like the HR11 does. If your flow does all the work and you're not going back to look at the PA31 record information, it may be easiest to just add the user fields in your PA52.4 action rather than adding them on HR15 in between.
    You are not authorized to post a reply.