Prev
Next
Forums IPA/ProcessFlow

Workunits will not run

Sort:
You are not authorized to post a reply.
Author
Messages
John Crudele
Veteran Member
Posts: 50
Veteran Member
7/7/2014 11:44 AM
    We are a windows/sql shop running 9.0.1 PF is 9.0.1.7

    Workunits are created but sit in ready status. processflow is set to poll every 5 minutes.
    They are not getting picked up. I can run them from designer. there are no errors in any of the log or out files. the ports are listening. I have done a pfserv ping all and it show everthing is running. i have stopped and started processflow numerous times nothing seems to work

    Infor has not come back with anything that has worked

    Any ideas would be greatly appreciated
    Woozy
    Veteran Member
    Posts: 709
    Veteran Member
    7/7/2014 2:49 PM
      Hi John - you mentioned that you'd restarted pflow services multiple times, but have you tried a full environment restart? Maybe there is something else gummed up somewhere that is causing pflow to be confused? I know that on the Landmark/IPA side this occurs if the Async service goes down, which is separate from LPS. Just a thought...

      Good Luck! Kelly
      Kelly Meade
      J. R. Simplot Company
      Boise, ID
      John Crudele
      Veteran Member
      Posts: 50
      Veteran Member
      7/8/2014 11:21 AM
        Kelly

        We did a cold reboot of the servers and the issue still exists. You mentioned about asynch.
         I kicked off a flow in designer using asynch it just hangs in ready status, if i run it synch it kicks off right away. At least I narrowed down the issue

        You response was very helpful 

        Thanks
        John
        You are not authorized to post a reply.