Search this forum:
Search
To join the discussion you need to register first. (Registration is free!) If you are already a registered user please login to join the discussion.
Page 1 of 212 > >>
Topics
 Replies
 Views
 Last Post
0 Replies and 92 Views Re-federating Landmark  92  0 Started by  LarryTD Is it possible to re-register the Landmark system, and then refederate it again with LSF Can a federated environment be unfederated for version 10.1.1   Asking for a friend.
0 92
11/08/2017 3:10 PM
1 Replies and 191 Views Managing Flows --Release VS Restart  191  1 Started by  tambrosi Hello All,    Have a question that I cannot find no doc on.    When using the Info Rich Client, there is a Release and Restart option available.    I am trying to find out what the Restart option would be used for.     IE:   If a flow that has multiple nodes ends up failing for some reason, and goes to failed status,  Will the restart pick up at the failed point or does it go back and execute the flow from the beginning  Thanks...
1 191
by  Tim CochraneJump to last post
11/03/2017 12:37 PM
8 Replies and 486 Views PROD_EMPLOYEE  486  8 Started by  edison I wanted the update resource node to not set any value in PROD_EMPLOYEE and left it blank assuming that it would skip updating this value. instead, i think it set the values to undefined   for this user, I can no longer set any value for COMPANY and EMPLOYEE in PROD_EMPLOYEE using Security Administrator or IPA. (there is no error. the value will just not get saved) Do you know of a LID program that can change this value or where to find the setting file where this value is store...
8 486
by  edisonJump to last post
10/13/2017 5:08 PM
3 Replies and 1933 Views Configuration Console  1933  3 Started by  Jay2 We have recently gone live with Landmark. I now am being asked to make changes to security classes within Landmark. I obviously need to take a the course on Using the Configuration Console. The problem is that it is telling me I need to be familiar with the Lawson Programming Language. I can not find any info on this online. Could someone point me in the right direction
3 1933
by  AngelicaJump to last post
10/04/2017 10:54 AM
3 Replies and 437 Views Landmark Security  437  3 Started by  kshields We are testing a new build of an IPA server. Prior to ISS Federation with LSF, we were able to log in to Inbasket and other IPA-related URLs as well as Rich Client and Designer. Both LSF and LM have been bound to the client's corporate LDAP for sign on authentication.   After Federating the two servers, Inbasket has worked as expected - you can navigate from Portal to Inbasket without being prompted for credentials by LM. However, any attempt to log in to Rich Client or IP Designer result...
3 437
by  kshieldsJump to last post
09/22/2017 11:05 AM
0 Replies and 179 Views Can not delete/remove a scheduled flow in Rich Client  179  0 Started by  HDAustin13 Hello,   I am trying to remove a scheduled flow in Rich Client (Version 10.1.1.50) but keep getting an error 'Request has triggers that should not be deleted' even thought that the process trigger is already deleted. I noted that there is an action in the Action Instance and tried to delete but there is no Delete option in the 'Action' drop down list.   Does any idea have this issue before Or have any idea on how to delete this schedule without getting an error, can you please s...
0 179
09/14/2017 11:52 AM
2 Replies and 792 Views Stop a scheduled flow in IPA  792  2 Started by  Lance Jurgensen I have been looking but can't seem to find a way to 'suspend' a flow in IPA. I don't want to delete it, just stop it from running on a scheduled basis. Do I have to delete the schedule to accomplish this When I do try to delete it, I get the error: 'request has triggers that should not be deleted' IPA 10.1.0.40.192
2 792
by  HDAustin13Jump to last post
09/14/2017 11:14 AM
5 Replies and 1218 Views COBOL Slowness  1218  5 Started by  Corey We are an Infor/Lawson customer working on an upgrade to their version 10 application suite. We are seeing significant delays in our batch job processing. When only one job is running with no users in our new environment we see process time 4 - 5 times longer than when they are run in version 9. We are running in a VM environment with the application and DB servers on separate servers running under Windows 2012 and SQL Server 2012 R2. After verifying and increasing resources on the servers we no...
5 1218
by  JimYJump to last post
09/13/2017 5:00 AM
3 Replies and 1185 Views SQL Query of Encrypted Data (SSN)  1185  3 Started by  Woozy Hi All, We use DB2 SQL OLEDB queries to pull data from Landmark/TM into our data warehouse.  We need to be able to do this with EmployeeIdentificationNumber to get the IdentificationNumber (SSN), but this field happens to be encrypted.  Does anyone know the trick to decrypt this data via SQL NOTE:  We're using the IBM DB2 drivers. Thanks!  Kelly
3 1185
by  ddubJump to last post
08/07/2017 2:29 PM
0 Replies and 172 Views New PL Security  172  0 Started by  Srini Rao Hello -We created a new productline in landmark . How do I grant the access to user to new product line  Where do I edit the data area /PL information.
0 172
08/03/2017 4:17 PM
0 Replies and 125 Views Email Server Configuration  125  0 Started by  FireGeek21 Looking to find all the places in LTM where the email server needs to be configured so emails from the various email templates can be sent.  We changed the mail server in the Configuration set in Process Server Administrator - all emails are going out that are generated by process flows only.  We are looking for the emails generated by appraisals, education, goals, etc. Thanks!
0 125
08/02/2017 4:29 PM
0 Replies and 135 Views What is the table EFFECTIVEDATEDENTRY used for and how to Join to relative tables  135  0 Started by  TimC We are future effective dating rows in Landmark (Lawson v10) and need to know the importance of the EFFECTIVEDATEDENTRY table. I am working with the EmployeeExport table and the WorkAssignment tables directly in SQL Server for extracts.
0 135
07/26/2017 9:09 AM
0 Replies and 222 Views LPL Help - convert decimal to string with formatting  222  0 Started by  Woozy Hi Everyone, I have a compute userfield that calculates a salary plus a percent.  I need build a derived field that includes this value to display on a form - basically formatted salary plus the currency code.   For example: Compute Field (Pay Rate * 110) value:  10,000.00 * 110 = 11,000.00  (note: field is decimal size 10.2) Expected Derived Field value:  $11,000.00 USD   However, when I reference the compute field in the alpha derived field, it doesn't ...
0 222
06/20/2017 4:12 PM
0 Replies and 280 Views Preferred Contract checkbox functionality in Contract Management  280  0 Started by  Andrew K Can anyone help me understand the functionality of the 'Primary Contract' checkbox in the Contract Management module in Landmark   
0 280
04/27/2017 12:43 PM
0 Replies and 174 Views Secadm Error: Start Work called with null actor  174  0 Started by  Woozy Hi Everyone - I'm hoping someone can point me in the right direction. Using the 'lawson' account, when I use 'secadm actor link {actor} {prodline} Employee {HROrganization} {Employee}' to tie the employee record to actor record, it throws error  'com.lawson.lajavarts.opf.OPFRuntimeException: Start Work called with null actor.' Both the actor and the employee exist. Anybody know where I can look to resolve this issue  I don't see anything in any of the Landmark logs... Thanks! Kel...
0 174
04/17/2017 5:51 PM
7 Replies and 2602 Views Refreshing application Data with Federated systems  2602  7 Started by  JimY We want to use daexport/daimport to refresh our test LTM application with our production LTM data. I found out the hard way that if your system is federated using ISS that this is not possible.  Apparently they are working on a solution for this, but it is not ready at this time.  Has anybody found a work around for this  What is strange is that I have no problems using the Rich Client and the flows are working, but Employee and Manager space are now inaccessible.  I do have...
7 2602
by  VipulJump to last post
04/10/2017 12:48 PM
3 Replies and 602 Views Landmark / IPA Update  602  3 Started by  Alex-Rexel UK I am looking at updating my Landmark / IPA versions to the latest version available on Infor Extreme as currently we are about 2 years out of date with the current package. Looking at my current versions, I will need to update Landmark including Rich Client and also Infor Process Designer.  This is the bit where I get stuck. I cannot find any information on how to update to the latest versions and what process I need to follow. This may be a real simple question and I will apologise in adv...
3 602
by  Jon.MaddenJump to last post
04/03/2017 1:48 PM
0 Replies and 294 Views Regression script post Landmark CU upgrade  294  0 Started by  Jason Johnston Does anyone have any regression test scripts they could share for a Landmark CU upgrade We are moving from Landmark CU47 to CU56 in our dev env. We are on windows servers.    Thanks
0 294
03/14/2017 3:12 PM
1 Replies and 254 Views Action Request details  254  1 Started by  Srini Rao When we perform the action in HR system it creates a record in ActionRequest business class. This BC only have header details. Where can I find action details, before and after.    Example, when we perform the transfer action on WorkAssignment Business class, we will see a record in ActionRequest BC with action name, actor, WU etc., But it does not store the new position and old position information. Which BC holds the information about the old and new values for given action.  ...
1 254
by  WoozyJump to last post
02/24/2017 8:35 AM
1 Replies and 307 Views Possible to call a Landmark web service from outside Lawson?  307  1 Started by  Jonathan Hello, Is it possible to call a Landmark web service from a custom .NET or Java application  Our requirement is to update GHR from a.NET application and I've been informed that the web services should be used for this purpose.  However, I can find no good documentation on it.  Has anyone successfully done this  Thank you. Jonathan
1 307
by  WoozyJump to last post
02/22/2017 3:27 PM
1 Replies and 508 Views Questions about Cloud Multi-Tenant vs Single-Tenant  508  1 Started by  Woozy Hi Everyone, We are currently running Landmark and LSF on-premise on  AIX/DB2, and there is some discussion about moving to Windows/SQL on the Infor Cloud.  One of the things that is being discussed is whether we should go multi-tenant or single-tenant.   We are HEAVY users of DB2 SQL queries in interfaces and flows, and we also do a significant amount of command-line scripting for things like triggering processes via our external enterprise scheduler. For those of you who are ...
1 508
by  WoozyJump to last post
02/07/2017 3:46 PM
5 Replies and 1074 Views Landmark security class  1074  5 Started by  Jay2 We have noticed some changes have happened in the security class InbasketUser_ST which has caused issues with users having access to certain businessclasses. The two that have come to our attention so far are as follows: Previous rules:  PfiWorkunitFolder BusinessClass is accessible for all creates, all inquiries unconditionally PfiWorkunit BusinessClass is accessible for all creates, all inquiries unconditionally Changed to:  PfiWorkunitFolder BusinessClass is acc...
5 1074
by  Jay2Jump to last post
01/27/2017 2:04 PM
0 Replies and 488 Views Rich Client Login Failure  488  0 Started by  Maestro Fellow Techies We have a situation after doing our own data refresh from PROD to DEV. We are able to use all validation links. However when we try to log into rich client we recieve the following error: A general security exception Stack Trace : com.lawson.rdtech.type.ViewException: A general security exception                at com.lawson.security.authen.AbstractLawsonLMcamManager.find(AbstractLawsonLMManager.java:5...
0 488
01/21/2017 4:29 PM
3 Replies and 1276 Views Landmark Form Customization  1276  3 Started by  SaraP Has anybody used the configuration console in Landmark to create a new field that has a string of new text and data already on the form  Our users are requesting a link that has a string and data from the form concatenated.
3 1276
by  DemichenerJump to last post
12/21/2016 9:29 AM
2 Replies and 505 Views USERFIELD modify history (EXPORT table)?  505  2 Started by  TimC I have a scenario where a USERFIELD is linked to the EMPLOYEEEXPORT table (form). I need to fetch the userfield's update history. I don't see a USERFIELD_STORAGE_EXPORT type of table. How do I check the history of USERFIELD updates I am using an SQLQUERY node to fetch the data as processing is not occurring via a flow.  So, I need the table relationships. I have the EEID.   Thanks much!! Merry Christmas.   Tim
2 505
by  TimCJump to last post
12/21/2016 7:17 AM
4 Replies and 1130 Views USERFIELD_STORAGE Business Class  1130  4 Started by  Srini Rao I'm need to extract the data from USERFIELD_STORAGE business class , but I;m not finding this business class in landmark transaction builder. But I can access the table using SQL.   In which module this business class resides
4 1130
by  WoozyJump to last post
12/20/2016 3:27 PM
1 Replies and 632 Views bpm/trigger use thru IPA Process flow.  632  1 Started by  tambrosi Hello All,  was looking for some information if this can be done.   Can a statement like this be used thru an IPA node,  I am wanting to submit a IPA process from another IPA process.    I can use this to submit a process flow from an open Browser.     https://&91;LMRK_URL&93;:443/bpm/triggertriggerType=ProcessAsync&triggerName=&91;TRIGGER_NAME_IN_LMRK&93;&dataArea=&91;DATA_AREA&93;&workTitle=&91;WORK_TITLE&93;   I need to trig...
1 632
by  tambrosiJump to last post
12/02/2016 1:01 PM
16 Replies and 1887 Views Landing Page not being displayed  1887  16 Started by  pops All of a sudden when a user goes to their Inbasket and selects their product, instead of the Landing Page being displayed, a white screen is displayed.  This happened on both the development and production servers.  No one has done any changes to the servers and I found it interesting that this happened on the same day, same time AND in BOTH on the Development AND Production Environments.  None of the servers are shared in either environment.  The landing page below is suppos...
16 1887
by  popsJump to last post
11/15/2016 12:26 PM
3 Replies and 779 Views Response Time  779  3 Started by  JimY We are currently on Landmark version 10.1.1.23.  (Yes it is I know it's old).  Infor has told us that if we upgrade to version 26 or above we should see an improvement in response time for Employee/Manager/Candidate space.  Has any one seen an improvement when they upgraded to versions 26 or above  Thank you.
3 779
by  Gok87Jump to last post
10/28/2016 5:35 AM
4 Replies and 710 Views Turn Landmark Security off/on?  710  4 Started by  Dave Amen David Williams reminded me of this wording: 'Yes, it is possible to turn off security in Landmark but there are warnings in all the documents that say that data will not be encrypted and basically saying it’s a really bad idea.' Given that, does anyone know how to actually turn it off (and on) Regards, Dave Amen (303) 773-3535  
4 710
by  Dave AmenJump to last post
10/26/2016 7:04 AM
0 Replies and 398 Views CreateGLACcount on HRGLAccountImport  398  0 Started by  giesewendy After implementation, we haven't modified the .lpd files for this Activity on our HRGLAccountImport.  So, what has happened is, the import is creating errors because the full GL account structure is trying to pass, including on inactive Accounting Units (either side).  When there are inactive accounting units, the system creates a multitude of errors.  Landmark:CreateGLAccount Application Error Accounting unit is inactive Activity name:CreateGLAccount id:2 failed 09/20/2016 0...
0 398
10/03/2016 11:08 AM
0 Replies and 473 Views Config Console - RehireResource Form Modification  473  0 Started by  DarleneC Has anyone had experience with adding the address State/Province to an existing form and wanting to get the List selection to display so that the user can select the State from a list of US States  I'm trying to do this on the RehireResource Form.  (Employee Business Class)   I'm wanting to customize the RehireResource to have the State/Province fields display as they do on the HireResource form.  I'm not able to get the State/Province selection to work ...
0 473
09/21/2016 3:47 PM
0 Replies and 445 Views Can't access link under Inbasket Lawson Process Automation for users other than Lawson  445  0 Started by  Xin Li Can't access link under Inbasket Lawson Process Automation for users other than Lawson in Lawson Portal. see screen print. Any idea what is wrong     It works for Lawson user.    
0 445
09/21/2016 10:54 AM
0 Replies and 498 Views Customizing IPA within Landmark  498  0 Started by  Andrew So, I'm still getting my feet wet with Landmark now, and am really excited to go back to vanilla Lawson/Infor after bastardizing it these past few years. After doing my initial review, I think the biggest win that I can get from the business is getting rid of our custom inbaskets and attempting to go back to the vanilla version of inbaskets. However, some questions that I have: For Proxy approvals, is there a way to limit the proxy users shows based on criteria I'm assuming that the...
0 498
09/19/2016 9:05 PM
4 Replies and 670 Views add segments to eligibility file  670  4 Started by  Cherie O first off...forgive me if this is in the wrong section or a stupid question. we have lost our lawson analyst and we have no experience. we have lawson 9.1 our insurance broker/provider has requested we  'would like to add an additionall EligData segment, which will specify the benefit coverage for members and dependents. This EligData is referred to EligData9 – Product Link records' they provided a file that we can compare to others that are saved in a reference folder. howe...
4 670
by  Ragu RaghavanJump to last post
09/19/2016 12:10 PM
2 Replies and 890 Views Can't configure Infor Lawson connection  890  2 Started by  Xin Li Our Lawson System Foundation and Landmark are federated and Landmark as primary authentication service. When I tried to configure Infor Lawson connection to Lawson system foundation at system configuration on landmark and tried to test connection it failed with error below. I was able to configure connection to other S3 environments that are not federated with landmark. Any idea what is wrong ViewException:   Class Name: PfiClassicConnection   View Name: PfiClassicConnection  ...
2 890
by  Xin LiJump to last post
09/14/2016 3:37 PM
2 Replies and 846 Views Schedule full sync of ISS  846  2 Started by  MC V10 - S3 only no GHR.  We would like to run a full sync weekly.  I know we can go into the IFS (ISS) and using the administrator click the button.  We would like to be able to schedule this to happen.  There does not appear to be a SSOCONFIG option that will do a full sync (without creation of a second file of ids of who we are syncing). Is there some option available that we are not aware of Thanks
2 846
by  Roger FrenchJump to last post
09/09/2016 10:50 AM
0 Replies and 416 Views Landmark node (create/update) vs SQL Transaction(insert command)  416  0 Started by  cymaano Hi, I am trying to convert PFI flow to IPA version. The current PFI is using SQL transaction node to insert work unit variables(LOGAN tables) and there are a lot of insert commands. Now, I would like to convert this to IPA version and I am sure the recommended step is to use Landmark node create action.   is it possible to use SQL transaction to create PF related tables such as PFWORKUNITS,PfiWorkunitVariable instead of using Landmark node   ex. PFI version INSERT INTO .dbo.WFV...
0 416
09/08/2016 9:08 AM
0 Replies and 350 Views enable my profile and take notes on ee space  350  0 Started by  giesewendy How do you enable the Take Notes and the My Profile options for employees on the Employee Space menu
0 350
08/24/2016 9:00 AM
2 Replies and 673 Views LPL to default a value  673  2 Started by  giesewendy I want to place a default into several fields on some of our forms.  Does anyone have basic LPL code for that  
2 673
by  giesewendyJump to last post
08/23/2016 11:25 AM
1 Replies and 829 Views PF to IPA Crosswalk  829  1 Started by  LauraBryant Does anyone have, or know where I can field, a crosswalk of the system variables available in Process flow and the new system variable in IPA  For example, I know that appProdLine no longer exists and is replaced by Main.ClassicDataArea.  oWorkUnit is replaced with WorkUnit.  WF-RM-ID is replaced with PfiUserProfile.   Is there a list of all the system variables  I don't want to recreate it if it already exists.   Thank you!
1 829
by  John HenleyJump to last post
08/12/2016 12:00 PM
1 Replies and 565 Views cdexport/import Single Actor  565  1 Started by  This_Guy I am familiar with the cdexport/import utilities. But, what I have never tried, was just exporting a single Actor (we call him Actor1) personalizations into another Actor (Actor2) in the same environment for Contract Mgmt. Seems like these would be the commands, although I cannot be certain of the syntax.  cdexport -z Actor1.zip --onlyactor dataarea Actor1 cdimport -I Actor1.zip --keepactor dataarea Actor1=Actor2    Anyone have exposure to this kind of single user export/impor...
1 565
by  This_GuyJump to last post
08/11/2016 3:12 PM
5 Replies and 1103 Views New Action Request  1103  5 Started by  Srini Rao Hello , How do I create a new action request on employee business class. 
5 1103
by  WoozyJump to last post
08/01/2016 10:38 AM
5 Replies and 2067 Views Mass load of role to actors in GEN of Landmark?  2067  5 Started by  Ronnie So we are preparing to get everything in order for our Lawson 10 go live. One of the steps is to get all users who use process flow inbaskets to have the required Inbasket_userST role in the landmark side.   Is there a way to mass load this role to users in landmark    The old company I was at, what we did that easy was added this Role to their Lawson security using a Mass Assignment inside the RM Administrator tool, and since we were federated we just ran a synch between lan...
5 2067
by  JeyJump to last post
07/25/2016 12:24 AM
0 Replies and 354 Views Using dbimport to batch upload data for user business classes  354  0 Started by  Panda Hung Hi everyone, I'm new to Lawson Landmark Xi so bear with me. Instead of using the portal, we are trying to automate the batch loading of values for some user business classes. So far I have identified three related tables: - UserBusinessClass - UserBusinessObject_Storage - UserField_Storage My questions are: 1) Is it relative straightforward to create Unix jobs to launch dbimport to upload the values 2) How can I find out what data area is associated with the UserField_Stora...
0 354
07/18/2016 10:36 AM
2 Replies and 839 Views Using Oracle tools to refresh Landmark data  839  2 Started by  This_Guy We have some pretty detailed steps to export/import our LM data from Source to Target, and have done that only 3 times, so relatively new. I chatted with my DBA and we were curious if there is any insight as to why no one 'seems' to be using Oracle tools (data pump) to do this kind of refresh, like we do with LSF current day.  I noticed the daexport is essentially pumping out to CSV files (BusinessClasses/Tables) individually, and the daimport is switching the prodline (Ex: prodlm=devlm), ...
2 839
by  This_GuyJump to last post
06/09/2016 10:39 AM
3 Replies and 2736 Views Refreshing LTM Data  2736  3 Started by  SP Does anyone have any experience or care to offer guidance re refreshing LTM data  I have an Infor functional consultant who is advising that LTM productlines cannot be refreshed. We have two LTM productlines in one LMRK env.  Currently all setup and conversions are happening in one of the LTM productlines with data being fed to S3 via IPA (LPA). The Infor consultant is advising the users that any garbage setup data going into LTM is there forever and there is no way to simply ta...
3 2736
by  Srini RaoJump to last post
06/02/2016 11:44 AM
0 Replies and 606 Views daexport  606  0 Started by  Srini Rao Hello - We run daexport and daimport to refresh the data from landmark prod to test environment. This process runs more than 8 hours as we have lot of WU and PFvariable.   Is it possible eliminate WU related data and export/import the application data.    Thanks  
0 606
05/27/2016 11:37 AM
0 Replies and 504 Views Question On Deleting ActorRoles  504  0 Started by  JimY I have created a flow that disables employee's based on their termination date.  The flow I have uses a resource update to remove the roles and disable the employee.  That part works fine.  I was hoping to use the List Based Sync to sync them up with the Landmark side so that they would show disabled there and also remove their roles, but unfortunately I am not getting anywhere with that.  I decided to go another route.  I am modifying the flow to use a Landmark transact...
0 504
05/09/2016 11:04 AM
2 Replies and 574 Views Proxys  574  2 Started by  Tom Denner I am being asked to test a complicated  process flow in LTM.  In order to kick the flow off I need employees, which I do not have because I am carried in the system as a consultant. If I select a manager with employees how do I set myself up as a proxy to him/her so I can test the flow as them Do I have to login as the manager to grant the proxy   Can I do it myself
2 574
by  WoozyJump to last post
05/09/2016 10:21 AM
6 Replies and 1253 Views Update IPA without update Landmark  1253  6 Started by  Xin Li Can we update IPA without update Landmark
6 1253
by  Tim SchmidtJump to last post
04/19/2016 9:47 AM
8 Replies and 1927 Views 404 error for Requisition Approval Inbasket after upgrade to 10.1.1.21  1927  8 Started by  JimY Has anybody else upgraded to Landmark technology 10.1.1.21  I upgraded our test system last week from 10.1.1.14 and cannot access our Requisition Approval Inbasket.  I have opened a ticket with Infor Support, but the response has been lacking.  I have checked and rechecked the installation guide and I believe I have done all of the steps correctly.  Thank you.
8 1927
by  JimYJump to last post
04/08/2016 5:50 AM
5 Replies and 792 Views How to change Hire A Resource Menu  792  5 Started by  giesewendy How can I change the field selections on the menus for the 'Hire A Resource' option in Landmark
5 792
by  giesewendyJump to last post
04/07/2016 4:11 PM
0 Replies and 492 Views Options to write reports against landmark  492  0 Started by  Ronnie I was wondering if anyone could help give input on options on writing reports against landmark  I know we have spreadsheet designer, but are there any other options for writing reports against landmark things such APIA    Thanks,
0 492
03/09/2016 8:24 AM
2 Replies and 1692 Views Landmark Create Report option  1692  2 Started by  Jay2 An Administrator in our company had created a report from the resources list.  She made it public so that all the different agencies could view the report but she wants it to be secured so that the agency users only see the information pertaining to thier agency or OrgUnit.  Is it possible to filter this data
2 1692
by  Jay2Jump to last post
02/10/2016 10:31 AM
5 Replies and 1094 Views Landmark Re-install fails on gridinstaller error  1094  5 Started by  Keith Barth Here is the error we are encountering on the reload of Landmark via the LANDMARK.jar process: run /prod/prod-LM/env/bin/gridinstaller java.lang.reflect.InvocationTargetException Error: java.lang.reflect.InvocationTargetException         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) Error:  at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessor...
5 1094
by  Keith BarthJump to last post
02/04/2016 7:51 AM
2 Replies and 1157 Views Limit records extracted in a Landmark Query Node  1157  2 Started by  JimY Is there a way to limit the number of records that a Landmark Query Node extracts  I am doing some testing and want to extract say the first 200.  Thank you.
2 1157
by  JimYJump to last post
02/02/2016 9:23 AM
1 Replies and 926 Views Landmark Grid fails to restart  926  1 Started by  Keith Barth After the orderly shutdown of the Landmark application (WebSphere, adminlaw, stoplaw, and stopping of the Grid), we are trying to restart the application. In that process, the Grid must start first. The two GridHost processes are starting normally, but the remaining start of the Grid is failing to start registry on host GridHost. We are using the  /etc/rc.d/init.d/grid_prod-grid start We have tried umounting and remounting filesystems and making sure that no Lawson processes and open...
1 926
by  Keith BarthJump to last post
01/28/2016 7:52 AM
4 Replies and 1461 Views Candiate space Link published on WWW  1461  4 Started by  xxxxxttysfh Candidate space is being published outside for us , we would like to know how you have done this 
4 1461
by  xxxxxttysfhJump to last post
01/07/2016 12:32 PM
1 Replies and 972 Views Recurring job scheduler for Global HR  972  1 Started by  Vijay S Just wanted to know , Is there a job scheduler similar to recdef (laswon S3) for GHR in Landmark OR One needs to procure Process Automator   Rgds,   Vijay         Thnx,   Vijay
1 972
by  WoozyJump to last post
12/17/2015 3:00 PM
9 Replies and 5582 Views Rich client login error  5582  9 Started by  BDT Hi , I have successfully installed Landmark product but when i try to log in to the rich client interface with Lawson log in credentials it gives me invalid user name/password error. Is there a default log in credentials for Landmark or can I create a new user ID to log in. Please help me solve this issue. Please refer the attachment for more information. thanks regards BDT
9 5582
by  PKSJump to last post
12/16/2015 5:09 PM
5 Replies and 1147 Views Multiple GRID Nodes - IPA  1147  5 Started by  This_Guy We are on LMRK 10.1 CU9, and have installed IPA successfully. I know that there is a way to install multiple Nodes for IPA, but dont have any idea how this is accomplished. I scanned the install docs, and cant find reference to it. The Primary Node is up > LPA, but want to have 2 addtl: LPA-1, and LPA-2. How would i install additional nodes  
5 1147
by  This_GuyJump to last post
11/13/2015 11:19 AM
3 Replies and 1241 Views Landmark issue SpreadSheet Desginner  1241  3 Started by  xxxxxttysfh We have an issue when trying to logon to LSD   :Connection Failed : object refrence not set to an instance of an object    
3 1241
by  John HenleyJump to last post
10/29/2015 2:41 PM
2 Replies and 958 Views Config Console - Action Request Question  958  2 Started by  Woozy Hi All, I am creating a new Action Request that is similar to the delivered CopyJob action.   The CopyJob action calls 'Create Job' and bases the new job on the job that the CopyJob action was called against.  As part of my custom version of the CopyJob action, I'd like to retrieve the Job Number of the new job that is created so that I can pass it to another action within the CopyJob action request - basically to copy the Position that is associated with the copied Job (we use 1 to ...
2 958
by  WoozyJump to last post
10/29/2015 12:48 PM
3 Replies and 1848 Views Java switch GRID  1848  3 Started by  This_Guy For those of you familiar with the manageSDK cmd for WebSphere, I was really hoping there was a similar command/way that I can run to switch the version of Java my GRID install is using GRID is currently installed using Java6_64, and I want to *switch* it to Java7_64. Anyone have any way of doing this Or know of all the CFG files that would need to be modified to capture the change (Trying to avoiding having to re-install) 
3 1848
by  Peter OJump to last post
10/28/2015 1:53 PM
8 Replies and 2775 Views Workunits in progress when moving from LPA to IPA  2775  8 Started by  Judy Consoli Infor Support is telling me that when I migrate from LPA to IPA, I must have all workunits completed or they will be abandoned.  Has anyone migrated from LPA to IPA and if so how did you handle those workunits.  We could have anywhere from several hundred to thousands of workunits in the approval process at any given time.  Abandoning them is not an option!!
8 2775
by  PKSJump to last post
10/22/2015 12:49 PM
1 Replies and 1223 Views Ghost NT Ids after Federation Sync  1223  1 Started by  Ethan Has anyone else experienced 'ghost' NT ids (NT00000XYZ Ids vs domain\userid) being created in User Group Definitions after running the Federation Sync with Landmark We have LSF set as our 'source of security'. 
1 1223
by  Peter OJump to last post
09/03/2015 2:56 PM
12 Replies and 1746 Views IIS 8 for Landmark  1746  12 Started by  Roger French Has anyone success fully installed and configured IIS 8.x for Landmark installed on Win 2012 I'm only seeing IIS 7 as the version which is compatible and supported with Landmark on Win 2012.   Thanks in advance, Roger
12 1746
by  Roger FrenchJump to last post
08/10/2015 1:40 PM
0 Replies and 944 Views Email Actions Base URL  944  0 Started by  jacquejp When updating our base email URL (as outlined below), the email address change is not taking in our notifications. This is in our test system. Productions is working, but we did upgrade to CU23 in test within the last couple of weeks. This CU is not in production.  This may be a likely culprit, but support has not been able to help us.  Rich Client > Process Server Administrator > Configuration > System Configuration > Open or create a configuration named 'system' > Email tab > Open ...
0 944
08/05/2015 1:39 PM
3 Replies and 3475 Views Get Employee attached to Actor using Landmark Pflow Designer (LPD)  3475  3 Started by  Woozy I am trying to find a way to identify the LTM employee number that is associated with an LTM actor using Landmark ProcessFlow Designer (LPD). I have the actor id (not the guid), but I can't figure out how to use a Landmark Transaction node to enter the Actor and return the HROrg and Employee from the Agent business class. I've also tried a relationship query from Actor without success. I've been able to get the ParentAgent GUID, but I can't seem to pass it into an AGENT query - I get an...
3 3475
by  Peter OJump to last post
08/04/2015 2:01 PM
1 Replies and 1074 Views IdentificationNumber  1074  1 Started by  Srini Rao I have a request from user to add the IdentificationNumber to resource screen. IdentificationNumber is not part of employee business class it's part of EmployeeIdentificationNumber. 
1 1074
by  WoozyJump to last post
06/25/2015 9:59 AM
2 Replies and 1217 Views After applying CU23 Landmark Technology I receive and error when logging in the second time  1217  2 Started by  JimY Hello,       After applying CU23 Landmark technology I receive the error below when I log in a second time to EMSS.  I log in once, log out and then log in again and I receive the error.  If I wait awhile I can log in again.  The error is: &91;code&93;  Error: It is a invalid request. Please contact your system administrator for further details. &91;/code&93;   In my security_authen.log file I am seeing the error below: &91;code&93;   S...
2 1217
by  JimYJump to last post
06/16/2015 10:47 AM
3 Replies and 1418 Views Jobboard in Rich Client  1418  3 Started by  SurvivorAC Is there a way to default the job board in the Rich Client  Previously, we created a context property, restarted the environment so that the new context would pull up, and then set the employee to the internal job board for each actor.  I was told there is a way to do this without creating a context.  If anyone has done this.  I would appreciate sharing the approach.
3 1418
by  SurvivorACJump to last post
05/27/2015 12:58 PM
0 Replies and 882 Views re-hire resource  882  0 Started by  Srini Rao I'm working on hire/rehire automation process.  As part of of the process we get the data from external applicant system and we load them to GHR using the process flow. Hire works fine.    But when i invoke the rehirehireresource action on employee BC, it fails with following error.  Exception: com.lawson.bpm.landmark.LandmarkApplicationException: Field Work Assignment Option is required: WorkAssignmentOption I did have the WorkAssignmentOption hardcoded in the landma...
0 882
05/26/2015 11:50 AM
6 Replies and 1944 Views IPA/Landmark - pass UA info to Action Form?  1944  6 Started by  Woozy Hi All, We are working on a fairly complex custom ActionRequest process.  As part of this process, we'd like to modify the ActionRequest form so that different approvers see different fields on the form based on the particular UserAction node that the request was generated from.  For example, maybe an action has a section for Comp update/approval, HR update/approval, and Finance update/approval.  We want the Form to show only the fields that require review/update for that specifi...
6 1944
by  WoozyJump to last post
05/14/2015 4:08 PM
1 Replies and 2476 Views Defaulting today’s date  2476  1 Started by  Srini Rao We like to default today’s date in effective date field on phone number update form (Employee Space).   What exactly I need to make change on the form using CC.  Here is my existing code looks like….           single column             effective date             Active         &n...
1 2476
by  Peter OJump to last post
02/20/2015 2:57 PM
2 Replies and 1769 Views AMS  1769  2 Started by  SurvivorAC We have AMS for our Landmark environment, but we are supporting our S3 environment.  The Infor manager of our AMS project had a couple meetings.  I thought the process would have been explained as to what our roles were.  The meetings were cancelled a couple months ago because she is part of the project meeting.  It seems like the process keeps changing, and I never know when I am to do a task until it has to be done today or when I am late.  Our environment has been bui...
2 1769
by  Peter OJump to last post
02/17/2015 1:58 PM
8 Replies and 1930 Views Creating/Manipulating Javascript Arrays in IPA  1930  8 Started by  Woozy Hi All, I have a situation where I need to create some JavaScript arrays to use within an IPA flow so I can store and manipulate values outside of a query loop.  I've tried several things, and I can't get anything to work.  I may be making it more difficult than it needs to be.  Have any of you been successful in doing this  Can you share a simple example of creating an array, adding elements to it (like within a query loop) and then navigating within the array (for-each)...
8 1930
by  Peter OJump to last post
02/13/2015 2:55 PM
1 Replies and 1524 Views Landmark SMTP Configration  1524  1 Started by  BDT Hi, How can I setup/change the SMTP configuration. Do i need to use landmark or other tool to do the configuration Thanks regards Buddhika
1 1524
by  Peter OJump to last post
02/13/2015 2:54 PM
2 Replies and 1503 Views Landmark Security  1503  2 Started by  Shan I am looking for a way to limit Actors from viewing ContractTypes they are not allowed to see.
2 1503
by  Peter OJump to last post
02/13/2015 1:58 PM
2 Replies and 1362 Views Global Personalizations?  1362  2 Started by  Terry P We are getting ready to deploy our first (and probably only) Landmark application. I can see how to customize forms, menus, even workspaces for myself. But how can I make them the default for all our users We want them all to have the same UI and not have to train them on how to do personalizations.
2 1362
by  Peter OJump to last post
02/13/2015 1:54 PM
2 Replies and 4005 Views Lawson Pattern Language (LPL) Reference?  4005  2 Started by  Woozy Hi Everyone, I'm wondering if any of you folks in LandmarkLand have any reference documents or hint sheets relating to Lawson Pattern Language (LPL) code that you would be willing (and able) to share As we are proceeding with our upgrade to LRMK/TM 10, we have a number of customizations from TM 3.4.2 that we are going to replace with configuration console mods.  Most of these changes are straightforward label changes, etc, but we also have a number of Actions where we want to add dat...
2 4005
by  Peter OJump to last post
02/13/2015 1:49 PM
6 Replies and 2184 Views Landmark Perl Script  2184  6 Started by  Deleted User Before installing Landmark, we used a perl script (ldusers.pl) to load our users into our LSF (9.0.1.11) system.  I now have a Landmark (10.0.4.6) system federated and have LSF (again 9.0.1.11) as the primary authenticator.  I am also using the ISS method to keep the users synced as opposed to kerberos.  When I add the user manually into ISS, it adds the user in both LSF and LMK successfully. I'd like to know if anyone is aware of any script that will load the users into IS...
6 2184
by  John HenleyJump to last post
02/13/2015 9:04 AM
2 Replies and 2198 Views Package Rich Client for Install after CU  2198  2 Started by  SP users are not granted admin rights to their pc's.  This causes a lot of difficulting anytime we apply a CU to LMK and Glawlaunch detects that a new rich client needs to be downloaded and unpacked.  Is there anyway to package the rich client as an executable, msi, etc... that can be pushed out to users and made available to them when they login to the pc's so that they do not have to pull down the new files themselves  Surely this client is the only LMK client that does not allow ...
2 2198
by  xxxxxttysfhJump to last post
02/10/2015 11:05 AM
3 Replies and 1236 Views IPA -Tracking - Action Taken Order  1236  3 Started by  jdever Using the Landmark Configuration Console allows you to add fields to the tracking display that the IPA users see. The 'Action Taken' is a 'many to one' field.  When you show it in tracking, it shows the first occurrence when it happens in the work unit.  This is confusing, especially if the action was first approved, then denied.  The user sees 'Approved' at first glance. Does anyone know how to change the display order Or is there a different field like 'last action taken' to ...
3 1236
by  WoozyJump to last post
01/30/2015 5:11 PM
0 Replies and 921 Views Loading Spreadsheet Designer  921  0 Started by  SurvivorAC We are setting up a room or rooms for training and working sessions.  We have multiple PCs to be used by multiple people throughout the project.  Due to rights issues, not everyone can load ISD initially.  It seems like once ISD is loaded, the PC user can load it for him/herself.  Is there a way it can be loaded once rather than having every person who uses the PC load it
0 921
01/13/2015 4:08 PM
3 Replies and 1544 Views IPD Java Script  1544  3 Started by  Srini Rao Hello, I'm creating a process flow to clean phone numbers in Landmark system.  I'm trying delete any special characters in phone filed , I used the following java script for my assigned node.. vPhone = fld.LEMPhone.replace(/&91;\(\)\.\-\ &93;/g, '')  I get the following error.... Activity completed: Start Activity started: Assign1400  (Run Id: 5) Activity Assign1400: Error evaluating expression: vPhone = fld.LEMPhone.replace(/&91;\(\)\.\-\ &93;/g, ''); vPhone = Va...
3 1544
by  Srini RaoJump to last post
01/12/2015 4:12 PM
0 Replies and 1217 Views Strategic Sourcing & Contract MGMT downtime procedures or suggestions on how to handle unscheduled & scheduled downtimes  1217  0 Started by  Deleted User Hello everyone!  We have been live with Lawson Contract MGMT for since June, 2013 and are in the final testing and implementation phase for Lawson Strategic Sourcing. My leadership has tasked myself and some team members to brainstorm how we will handle scheduled and especially unscheduled downtime issues. Does anyone have any procedures for these two Landmark systems they would be willing to share with Children's Medical Center in Dallas (AKA- ME) OR any suggestions or ideas that coul...
0 1217
10/10/2014 9:56 AM
2 Replies and 1431 Views Landmark Spreadsheet Designer  1431  2 Started by  Frankie Hennessey I am receiving the following error message 'Value does not fall within the expected range' after installing Landmark Spreadsheet Designer.  This message occurs when I open Excel and try to open the spreadsheet designer once it has been installed.  Has anyone experienced this error msg before
2 1431
by  Lisa HodgesJump to last post
10/02/2014 3:53 PM
1 Replies and 1445 Views Landmark secadm command  1445  1 Started by  redanker After upgrading to env 10.1.0.26  secadm delete actor command no longer works as expected. we receive  Error: Unable to load data area DEFAULT.  It says Actor xxuseridXX has been deleted, but it has not.
1 1445
by  redankerJump to last post
08/27/2014 11:17 AM
3 Replies and 1165 Views New Phone Type  1165  3 Started by  Srini Rao How do we add new phone type to the 'Add A telephone pager or fax number' screen. Currently it has landline, mobile, Pager. Fax and TTYTDD. Administrator --> resource --> resource --> open the resource  --> Select Personal Information (on Left) --> Add Phone.  
3 1165
by  WoozyJump to last post
08/25/2014 11:18 AM
1 Replies and 1118 Views Rich Client packaging (VDI)  1118  1 Started by  muzammils Is anyone here able to package the Rich client We will be rolling Lawson out to 3,000 users and absolutely can't go manually into any machine to install the Rich client. I'm looking for any helpful recommendations and tips from anyone who has had other Infor client in similar situations.
1 1118
by  JimYJump to last post
08/16/2014 9:07 PM
1 Replies and 1449 Views How are 'Classic' workunits(bpm) maintained once Landmark is activated?  1449  1 Started by  Demichener     We have recently installed Landmark in our test environment and have activated the federation of users.  We have also set the PF flag and flipped the switch to process the flows on landmark. I am currently in the process of writing a flow for the landmark side to delete all of our approval wu's once they have completed and are older than 30 days.  What I've run into though is, even though the flows are all running though Landmark; 'classic' workunits are st...
1 1449
by  Carl.SeayJump to last post
07/28/2014 8:27 AM
3 Replies and 1417 Views Admin_ST  1417  3 Started by  Jay2 Is Admin_ST considered a 'Super User' role
3 1417
by  WoozyJump to last post
07/16/2014 9:26 AM
4 Replies and 2164 Views Has anyone gone to Landmark from S3?  2164  4 Started by  martingibbs If this isn't the right forum, please let me know.  Has anyone gone from an S3 installation over to Landmark and kept some or all of your existing S3 setup Example would be moving over to Landmark but keeping a feed to Payroll, or HR11. We've been brainstorming some ideas here and while we're pretty sure nobody has done this, it doesn't hurt to ask. Thanks.
4 2164
by  Tim CochraneJump to last post
06/11/2014 10:13 PM
3 Replies and 1363 Views LogonPage  1363  3 Started by  Srini Rao Hello, How do I add company logo and custom message on the login page. I tried to edit the \IBM\WebSphere\AppServer\profiles\Landmark\installedApps\ServerNameCell01\lmrktest-gen-law-env.ear\sso.war\v3\login.html Off course I rebooted the server but I do not see my changes. Please Advise
3 1363
by  Rick McCahanJump to last post
06/05/2014 11:13 AM
2 Replies and 1160 Views Workunit Delete Error - Cannot get Transaction for rollback  1160  2 Started by  Adam Details for Incident 7515865 - Workunit Delete Error - 'Cannot get Transaction for rollback' .RadGrid_AlSkin .rgRow td, .RadGrid_AlSkin .rgAltRow td, .RadGrid_AlSkin .rgFooter td { border-top: 2px solid 828282; border-bottom: 0px solid 828282; } .RadGrid_AlSkin .rgFilterRow td { border-bottom: 0px solid 828282; } .RadPanelBar_AlSkin div.rpHeaderTemplate, .RadPanelBar_AlSkin a.rpLink { background-color: transparent; background-image: url('../Telerik/AlSkin/PanelBar/PanelHeader1200.png')...
2 1160
by  AdamJump to last post
05/27/2014 8:04 AM
2 Replies and 1101 Views New Menu  1101  2 Started by  Srini Rao How do I create new menu in employee space. We like to add the new menu under employee space --> ToDo -> PayAndBenifits --> Benifits (new menu) --> different links to S3. Any help is appreciated.
2 1101
by  Srini RaoJump to last post
05/21/2014 11:44 AM
2 Replies and 2197 Views Update landmark to latest version 10.1.x and failed  2197  2 Started by  Xin Li I tried to update landmark environment from 10.0.x to 10.1.x and got error below. Anyone has any idea what is wrong run /lsf_lmk_env/env/bin/secadm  -d gen  provision os -C -o -a WARNING: Undefined MessageProducer: SecurityProvisioningLogger Actor Name = lawson Service factory: com.lawson.webservs.service.ServiceLocalFactory created SpecRepositoryFactory: SpecRepository(PreloadOnEnstantiation): gen (SLVUW): Resolution time - already loaded java.lang.NullPointerException E...
2 2197
by  Xin LiJump to last post
04/08/2014 10:00 AM
3 Replies and 1745 Views Designate Default LMRK10 Prodline  1745  3 Started by  Woozy We are in the process of upgrading from Landmark 9 to Landmark 10.  One of the slightly irritating issues we are having with v10 is that we can't figure out how to designate the Rich Client default prodline for a user.   In our environment, some of us have access to both the GEN and PRODHCM prodlines.  Currently, when we log in to Rich Client we always start out in the GEN prodline, and we have to select PRODHCM from the dropdown.  Yes, this only takes a couple of seconds,...
3 1745
by  WoozyJump to last post
04/01/2014 4:31 PM
To join the discussion you need to register first. (Registration is free!) If you are already a registered user please login to join the discussion.
Page 1 of 212 > >>


RSS Feed Available