Prev
Next
Forums IPA/ProcessFlow

Changing SMTP setting for process flow

Sort:
You are not authorized to post a reply.
Author
Messages
Saurabh
Veteran Member
Posts: 94
Veteran Member
6/19/2009 5:54 PM
    Hi All
    Need to change the SMTP server setting for the process flow.
    I can see the smtp server setting  in Process flow designer (Tools--Options) but not sure if that is the only place the change needs to be.

    Has anyone made similar changes and if so can you please forward details of where all i need to make the changes

    Regards
    Saurabh
    Saurabh
    Veteran Member
    Posts: 94
    Veteran Member
    6/19/2009 5:59 PM
      Do i also need to run the pfserv config command from LID and make the changes in it?
      If so will it require a start and stop of lawson or just the process flow for the change to take effect
      Gary Davies
      Veteran Member
      Posts: 248
      Veteran Member
      6/23/2009 1:54 PM
        Yes, change with pfserv and stop and start servers.
        jrbledsoe001
        Veteran Member
        Posts: 91
        Veteran Member
        8/22/2009 12:39 AM
          Hi,

          I had to do this today because our test system was configured with an old e-mail client.  In my case I had to change the bpm.poperties file and the install.cfg.  When I bounced PF it picked up the new mail client.  Good luck.
           
          You are not authorized to post a reply.