Prev
Next
Forums S3 Systems Administration

Change Host Name of WAS server

Sort:
You are not authorized to post a reply.
Author
Messages
JohnO
Basic Member
Posts: 15
Basic Member
2/16/2011 7:58 PM
    We had to change the hostname of our windows 2008 server that is running WAS 7.0 for Lawson. Does anyone have a process for changing WAS configuration to use the new hostname? Since the nodes and cells all use the host name WAS will not run until I make the change but I'm not 100% sure of all the places that need to be changed. Any help would be great.
    George Graham
    Veteran Member
    Posts: 201
    Veteran Member
    2/16/2011 9:21 PM
      This can be tedious and difficult. I've done it by hand before and there are literally dozens of references that need changed. However, here are some adiditional references that might help you.

      http://www.ibm.com/develo...s/SampleScripts.html
      http://www.rohitprabhakar...etwork-name-changed/
      John Henley
      Senior Member
      Posts: 3349
      Senior Member
      2/16/2011 10:31 PM
        I actually think it's easier to reinstall and configure WAS.

        Thanks for using the LawsonGuru.com forums!
        John
        JohnO
        Basic Member
        Posts: 15
        Basic Member
        2/16/2011 11:30 PM
          Thanks George I will check those out.
          Roger French
          Veteran Member
          Posts: 545
          Veteran Member
          2/17/2011 6:23 PM
            I agree with John. Reinstall WAS is I think, the easiest to do.

            To change the host name, etc. in all those places is a pain, and what happens if you miss one or a few of those places and "things don't work". 

            Something similar, I've been asked in the past to change where the Lawson environment is physically located (i.e from one drive to another), and I recommended a reinstall too. I think there is just too many places where you may miss something otherwise. 
            George Graham
            Veteran Member
            Posts: 201
            Veteran Member
            2/23/2011 2:32 PM
              Let me follow up my post with I agree with the reinstall - MUCH cleaner approach - and typically much faster and easier.
              You are not authorized to post a reply.