Prev
Next
Forums IPA/ProcessFlow

Infor Process Automation and File Channels

Sort:
You are not authorized to post a reply.
Author
Messages
Todd Mitchell
Veteran Member
Posts: 87
Veteran Member
7/2/2014 12:11 AM

    I am brand new to Infor Process Automation.  I have finally achieved 90% of what I want to accomplish in my process flow using Infor Process Automation.   One of the 2 remaining pieces is to make sure the process only runs from 6:00 am to 8:00 pm.  

    I created a File Channel to "watch for" and recognize when a file shows up on my Lawson application server.  However, I only want this file channel active from 6:00 am to 8:00 pm.   I am aware that there is a Flow scheduling capability but have been informed that there is no way to schedule the File Channel activity.  Is it possible to create a flow that changes the File Channel from Active to Inactive and vice versa?

     
    Tags: File Channel
    Woozy
    Veteran Member
    Posts: 709
    Veteran Member
    7/2/2014 1:44 PM
      Hi Todd Mitchell,

      I suppose you could create a pair of simple flows - one that activates the channel and one that deactivates it, and then run those flows on a schedule at 0600 and 2000. There are "activate" and "deactivate" actions on the pfifilechannel business class which you should be able to call to make this happen.
        
      Good Luck!

      Kelly
      Tags: File Channel
      Kelly Meade
      J. R. Simplot Company
      Boise, ID
      David Burnham
      Basic Member
      Posts: 9
      Basic Member
      7/2/2014 1:55 PM
        We had a similar issue. What we did was to set up a loop in the beginning to write/append the input file to a work file. 

        Then we check the date (time in your case). If it's within the operational window the rest of the flow runs, if not then the flow ends. 

        The catch is if a file(s) come in outside of the window they will sit and wait for the next file. To get around this have a scheduled task write an empty file to the input file location. It triggers the flow inside the operational window and the work file is then processed. 
        Tags: File Channel
        Todd Mitchell
        Veteran Member
        Posts: 87
        Veteran Member
        7/2/2014 2:29 PM
          Thank you very much -- this is exactly what I want to do.  However I have one problem -- I don't know what a "pfifilechannel business class" is.  
          Tags: File Channel
          Woozy
          Veteran Member
          Posts: 709
          Veteran Member
          7/2/2014 2:52 PM

            Sorry, my mistake.  It should be "PfiChannel" business class. 

            A business class is a combination of business logic, user interface, and data.  When you use a "Landmark" node in IPA, then you are doing something to a business class.  In this case, you want to run the "ActivateAllReceivers" or "Disable" actions on the "PfiChannel" business class.

            See the attached for an example of the "Activate" flow.


            Good Luck!
            Attachments
            Tags: File Channel
            Kelly Meade
            J. R. Simplot Company
            Boise, ID
            Todd Mitchell
            Veteran Member
            Posts: 87
            Veteran Member
            7/2/2014 3:26 PM
              Thank you for that clarification.  As I was looking to see if I could figure out what you were referring to, I looked at the Landmark node and was thinking that was it.   I now have to contact our IPA installer because he did not set up the Landmark access correctly.

              Thank you so very much as this is exactly what I am trying to accomplish.
              Tags: File Channel
              You are not authorized to post a reply.